Whether you are positively planning to build digital home or realize your home now could be smarter, a bit of research and advice can go a long way. Home-wide technology can be fantastic but also expensive. In this article we outline the key components of a smart home and what aspects to consider. We find that in order of importance, one must have: a) Plentiful and safe power sources b) A fast network c) A reliable server d) Some consideration of security e) Networked devices that act as inputs and outputs to fully realize the potential of your smart home.

Once you’ve put a thought to each key point it will be so much easier to make decisions that will save you money now and in the long run, for a true budget smart home. Invest more time planning so you can spend more time enjoying later, because after all that’s what the goal of a digital home is.

 

Power

 

It’s easy to overlook the power needs of your devices. Some people only discover their power setup is deficient after buying and setting up all their devices. In today’s modern home, full of portable electronics that must be charged up, lights, televisions, routers, speakers and other gadgets, one quickly runs out of available power sockets. If you are buying energy intensive devices like heaters, ovens, large entertainment systems and the like, it’s also quite possible you will overload your home’s mains power. In traditional mains wiring, at least each room, and normally lights and power sockets in the room, will have a circuit breaker rated at a particular amperage. If you plug in too many devices you might overload the circuit breaker and find your TV suddenly cutting out in the middle of your favorite show, your blog article being lost when the PC loses juice or your bread loaf dying when the oven cuts out unexpectedly – a nightmare for anyone. If your home is poorly wired or older, overloading might also present a fire risk. Another issue is lack of space to plug things in – you will probably need mains extension “bricks” and adapters everywhere if your house is older or poorly designed with insufficient outlets.

 

So before you start your digital home project check your rooms’ outlets and circuit breaker rating (if you’re not sure, best to check with a professional electrician). Make sure you are at going to use at least 50% less Amps than your house mains is rated at, because some devices may pull more than their rating under certain conditions and let’s face it – not everyone using your home is going to think about the power drain when they plug something in. For extending outlets, it’s better to invest in high quality extension cords and bricks that have a wider space per outlet so you can fit in the bulky AC/DC adapters that come with many devices. It is absolutely essential that the adapter is fully certified to CE, UL, FCC or other standard as required by your country, and choosing a well known brand is one way to be confident it is. Consider buying power adapters with inbuilt USB ports so plugging in phones and tablets is convenient and separate chargers don’t take up all your space.

 

 

Network

 

 

The key ingredient for any smart home is the network. While more and more devices connect to mobile technologies like 3G, 4G and traditional cellular, the most economical and secure network for your home is still a fixed wired or wireless one. LAN (wired Ethernet) has been around for decades but is still cheap, fast and compatible. If you’re building a new house, renovating or don’t mind DIY, installing CAT6 LAN cables are ideal, and will be fast enough to power your smart home devices probably for the next decade. CAT5e is the minimum cable type that is recommended to ensure reliable data speeds of at least 1 Gigabit over long distances but to truly relax buy CAT6 knowing you can reach speeds of 10 Gigabits up to 100m distances in the future if your devices need it. If you need to route cables externally through doorways or other tight spaces, CAT5e might be better since the cable is thinner, more flexible and can be flatter (if you choose flat cables). But bear in mind your network is the critical backbone of your smart home so investing a little more money and time is best if you plan to live in your home for many years. A 100Mbit LAN can support Bluray 1080p content; possibly 4k video, and you can be rest assured that a 1 Gigabit LAN should support your media streaming needs for at least the next 10 years. After all, Gigabit Ethernet can transfer data at more than 100 MB/s, while 1080p Bluray streaming requires only around 5% of that.

Every smart home needs a wireless WIFI network too, but it’s much more difficult to reliably distribute digital content about your home using WIFI – you will save countless hours and money by choosing a wired LAN as the backbone of your digital home. If you absolutely must use WIFI, ensure you invest as much as possible in your router and choose one with fantastic antenna performance and range, as well as the latest specification of WIFI available in the market.

Since we are focusing on a budget smart home, “powerline” Ethernet adapters are not recommended due to their relatively high cost versus reliability. But if you are confident in their performance, they can be superior to WIFI.

 

Server

 

While technology is becoming more and more “distributed”, a central server is the standard and perfectly future-proof solution for your home. By “server” we mean a system comprising a processor, file storage and networking. The range in servers is huge – you could have a single USB drive connected to the network and call it a server, or a powerful computer with massive storage. For most people, a system with at least one hard drive and a processor less than five years old is adequate. Of course, the server should be wired directly into your network at the fastest possible connection speed. You can purchase a “DLNA” server, “NAS” server (for several hundred US dollars) or high-end system to control your entire house (several thousand or more US dollars). But in fact any personal computer, laptop or even a capable Internet router will suffice. Some internet routers have a USB port that you can connect a USB hard drive to, and the router’s processor can handle the media streaming, provided the router has appropriate software installed, such as a DLNA server. You can install free DLNA or other server software on a Windows or Mac PC in minutes. Basically you can re-use an old computer to act as a home server, or buy/make a new computer specially. Many networking devices run on Linux, so if you see something like a NAS or DLNA server for sale, just remember you can install Linux on an old computer and easily replicate or surpass the supposedly high performance dedicated servers for sale today. When choosing your server, make sure a) It’s networking speed is at least 100Mbits b) It has plentiful storage space c) The processor is at least less than five years old. Normally, providing the network speed is very fast and the processor quite recent, spend as much money as possible on the storage, such as multiple, high-capacity hard disks.

 

Entertainment

 

So now you have the high power and superfast data ready for plugging your devices into, the first thing you’ll probably want is some music. Because you’ll need it to keep you energized while you install and setup the rest of your smart home! If your server is already online, or you have a portable storage device like a phone, you will need some kind of music receiver. It could be short-range like Bluetooth, or have longer range like WIFI. But the most important aspect is convenience – with music you want instant playback or listening becomes more stress than enjoyment. Look for a music receiver with always-on connection like Bluetooth, WIFI, or simply a 3.5mm analogue input cable ready to plug into. If all your music is on your server, again convenience reins supreme – choose a music player with fast and easy navigation to find your favorite song or playlist. Then, just add speakers! For TV, video, movies and games you will need some kind of screen - be it a computer screen, TV, projector or portable device like an iPad. But not all screens are created equal – some are smart, some aren’t. If your screen is just a display alone, you will need something with a processor to retrieve and control your content. New “Smart” TV’s have the necessary processor and software to work with most servers – if you have an older TV or just a screen you can buy a “Smart TV box” or “Dongle” that can do the same. Unlike Music, for video content you do need a good processor to display your content reliably, so choose a newer “Smart” TV or media player. Normally speaking, the newer it is, the longer you will be able to use it.

 

Information

 

You create information wherever you are; the question is how and where to store it until you need it next. If you have a server, this is the natural place to store it. If not, it’s another reason to invest in a reliable server. Your information is critical – the server should have redundancy, meaning at least one backup of itself that can be restored. Once you’ve got your information to the server (by copying over the network manually or with automated backup software) you can either backup your server’s information manually (which is a rather wasteful endeavor) or choose a server than can do this automatically. For most servers, the minimum requirement here is two hard disks, of which one will be a mirror image of the other (known as RAID 1). If one disk fails and all information is lost, the other retains an exact copy. Given the higher importance of digital information today such as photos, documents, designs and such like, implementing a redundancy system is critical. Aside from storing your important files, web-accessed information such as news can be downloaded via your network and accessed on any smart device such as a tablet or screen. For example a screen in the kitchen to access recipes or check the news at breakfast time.

 

Security

 

On a budget, one cannot expect impervious defenses from hackers or casual snoops. But you must spend some time thinking about security. Step one is to change any default device passwords. Step two is to limit access to your private files from people who don’t need it (should as guests). Step three is to install and maintain antivirus software and firewalls on your server and/or other devices in the network. Finally, private information should be securing by encrypting it so only the password holder can open it. Consider encrypting all the secure files on your server such as financial and personal information, digital document scans etc.

On the flip side, your smart home can be a security asset, not just a risk. With your network ready, LAN or WIFI enabled cameras can be plugged in around your home and setup to stream video to the server.

Finally, physically secure your server. It should be kept somewhere safe from damage and thievery.

 

Automation and home management

 

A newer perk of smart homes is leveraging your network to control the home – your lights, curtains, heating, kitchen appliances, air conditioning and more. The technology is basically a receiver and actuator – such as a WIFI radio with motors for the curtains, or Bluetooth radio and switches to control your lighting. You can use a phone, tablet or sensor as the input, perhaps even using the Internet to control your home from outside. Previously restricted to the high-end, keep your eye out for devices such trickling down to the budget market.